Quick Look : Stick & Stretch Gallerie Wraps

SS_fsAs I've been looking at alternative ways to display prints, I came across this item called Stick & Stretch Gallerie Wraps.  Or at least that's what they are called in Canada.  In the United States, you'll find them under the brand name Hahnemuhle Gallerie Wrap.  Different packaging, same thing. Basically they consist of four sticks, 1 ¼ wide in the Standard version and 1 ¾ wide in the Pro version.  Each stick has an adhesive strip pre mounted, is beveled at the corners and is notched to fit into these moulded corner braces.  You need a set of corner braces to make the system work, so your first purchase should be a Starter Pack that contains four sticks, reusable corner braces, a bottle of archival glue and some corner pins that look a lot like big heavy staples.

If you've ever done a Gallery Wrap the old way, with stretcher pliers and staple guns and hot glue, you know that while the final outcome can be beautiful, getting there is often arduous and frustrating.  Hence this kit.

There are a couple of videos on the web that show how to use the kit, one from Photoplus in 2010 with the inventor, and one with Phil Neilsen from Amplis Canada.  Both are excellent, Phil's is a bit easier to follow.

Making It Happen

  1. You collect your four sticks and by choosing different lengths and widths, you define your wrap size.  Let's say you take 2 14" sticks and 2 17" sticks.  You'll set up your print job to produce (for the standard sticks) a print that is 16 ½ x 19 ½, basically adding 2 ½ inches to the length of each dimension.  This leaves you enough excess canvas to complete the wrap.  If you are using the Pro series, you need to add 3 ½ inches to the length of each dimension.
  2. Print your image onto the canvas of your choice.  This may require a higher end printer, or that you send the image out to a lab.
  3. Once the canvas is dry, hold it up to the light and mark the corners of the printed image on the back.  This is important because you will use these marks to align the sticks.
  4. Peel back the cover of the adhesive on each of the beveled corners and then put the sticks into the corner blocks.  They only go in one way.  Standard corner blocks are blue, Pro corner blocks are red and they are not interchangeable.  Press the sticks down into the corner blocks so the back sides of the sticks are flush with your table.
  5. Peel the remainder of the covering on all the sticks.  Picking the frame up (corners and sticks) place it on the back of your print.  Use the marks you made on the back to align the corner blocks to the corners of the printed image.
  6. Press each stick straight down.  It will release from the blocks and adhere to the canvas.  Use lots of pressure, you are making a bond happen between the stick and the canvas.
  7. Run a razor knife along the outside edge of each stick to trim the canvas.  On larger prints you might want to leave an extra ½" to allow for an optional stapling step.  Extend your cuts square to the corners and remove the excess canvas.
  8. You know have four sticks glued to the back of your image, that are properly placed and what looks like a square canvas area in each corner.  Cut each corner at a 45 degree angle and fold back each section and adhere it to the exposed adhesive on the sticks.  This will produce really nice clean corners when you do the tensioning.
  9. Run a bead of archival glue down the inside edge of each stick.  When you tension, this glue will further adhere the canvas to the front edge of the stick and help address movement in the canvas over time.
  10. Starting with any adjacent pair of sticks, fold them upwards until their beveled edges meet in a nice corner.  Take one of the staples and press it into the predrilled holes.  Don't push it all the way in yet.
  11. Repeat for the other three corners.  There is now nice tension on the canvas.  Inspect your corners and if you are happy, tap with a small mallet or use some flat object to press the staple all the way in, anchoring each corner.
  12. Take the supplied corner brace sticks and press them into place.  The mounting sticks have little notches pre-cut for these braces.  This takes a bit of pressure and then they snap right in.  This further tensions the canvas.
  13. At this point, I like to take a hard rubber roller and press the edges of the wrap again to assist the adhesive to bond.
  14. If you left extra canvas for your big print, now fold the excess over the back edges of the stretcher sticks and put a staple in every couple of inches.  The adhesive is very good but this is sort of belt and suspenders solution.

Thoughts

This is really dead simple.  My first one lost some tension about ten minutes after setting up, and that's why I added the step using the roller.  The second one remains taut as a drumhead.  The pricing for the sticks is pretty reasonable considering that they are all preformed and predrilled, the adhesive is decent, the archival glue works well and the staples are easy to work with.  You will need to buy at least one starter kit for each format to get the proper corner blocks but once you have them, you're good.  You can also buy glue as a standalone product as well as sacs of extra staples.

If you want to see someone do this before you buy, watch Phil's video on the Amplis Store page here.

---

Followup a day later.  I've changed my description of the strip adhesive from good to decent.  It doesn't stick consistently and to my disappointment, both wraps have sections that became unstuck.  So I'm changing my rating and going to call the company tomorrow to vent a bit.

First Prints : Breathing Color Crystalline Satin

I'm one of those photographers who thinks that a photo is only truly complete when it becomes a print.  There's something very special about holding a piece of art in your hands, a tactile experience very different, and in my opinion, superior to seeing it on screen. I was recently listening to an interview with Tokyo based wildlife photographer Martin Bailey and he was raving (again) about Breathing Color paper and canvas.  I went online and tried to place an order as they only sell direct, but when the company got back to me, shipping was going to be more than the cost of the paper.  I live in Canada, and I guess sending stuff from parts of the USA is akin to launching a rocket to Mars.  That's not true for Red River Paper, they process orders and all the costs are included at excellent pricing, but I digress.

A tech support person at Breathing Color advised me that Amplis in Canada sold their paper direct.  Amplis has an online store so I went to it.  No Breathing Color.  It only appeared on the Dealer secure site.  I wrote back to Breathing Color and told them their Canadian option seemed broken.  The same young gent contacted Amplis and I was contacted in short order by Phil Neilsen and Pat Cameron.  Phil sells for Amplis.  Pat is on the order desk.  Both were very helpful.  Pat processed my order and I picked it up, with only a couple of hiccoughs, the same day.

I ordered five 17" x 20' trial rolls.  The new metallic paper was not in stock but the others were so I collected them.  Lyre Canvas, Crystalline Satin Canvas, Vibrance Matte and Optica One were my selections.  This morning I had some time and so unloaded the default roll of Epson Professional Premium Lustre that I typically have queued up in my printer.  After loading the roll of Crystalline Satin, I set to making some prints.

I love the Epson 4900 but it has its quirks.  Single sheet canvas handling is one of them.  Once I got the roll loaded and feeding properly, (more challenging than it should have been), I read the insert that came with the paper.  Breathing Color not only supplies setup instructions for Windows and Mac for their papers, they include screenshots to help you out.  Of course the screenshots did not match my world exactly, but there was more than enough information to create a printer preset for the roll of Crystalline Satin.

One of the other things I really like about Breathing Color is that when you go to download their ICC profile for a paper, the download contains all their ICC profiles in a single package along with an aliased installer to make installing them completely painless.  Every other paper company SHOULD learn from this simple and very customer-centric step.

Lightroom 5.2 was used to make my prints.  Two shots were in colour, shot on a Canon 1D Mark IV with the 100-400 and 1.4x teleconverter, the first of a giant panda and the second of an african rhinoceros.   The third was a scan of a 4x5 TMAX 100 negative shot with a Nikkor 210mm on my Sinar P that I had processed earlier this week.  I thought it would be nice to try these different subjects on canvas.

Despite a first time feed error, once I unloaded and reloaded the canvas, the Epson 4900 did the job I bought it for.  It produced great prints in a reasonably timely fashion.  I liked very much that the ICC profiles worked flawlessly with Lightroom's proof print function and that I could see what the prints would look like before printing.  I have had issues where this did not work properly with other vendor's ICC profiles.  I keep my displays calibrated using a Color Munki Photo so I got out what I saw on screen after allowance for reflective textured media vs backlit display.

The canvas is very thick and Epson advises not to use the built-in cutter for canvas on the 4900.  I set the printer for no cut, and learned how to advance and then withdraw the paper once I cut it with an X-Acto after each print.  The 4900 does a great job of prepping the roll and my not straight cuts caused no issues with the next prints.

Once the pigments had dried for a while, I sprayed each print with Hahnemuhle's spray canvas protector.  You have to do this outside unless you want to go on a coughing jag.  Once the varnish was dry enough for handling, I took a tip from friends Kathy Constantinou and Simeon Tse and mounted the prints on foam core.

My usual response to printing is to frame stuff, but I had done an experiment with mounting a Moab Metallic Pearl print on foam core and I liked the outcome very much.  I have not yet bought gallery mount kits for canvas, (next week, Amplis has some great kits), so I thought, what the heck?  I sprayed the back of the canvas with 3M photographic spray cement and then placed the prints on the foam core.  I covered the print with parchment paper and used a rubber roller working from the centre out to lay the canvas down on the foam core and roll it flat.  It worked surprisingly well, so a big thanks to Kathy and Simeon for their initial coaching.  Once the glue had set up a bit, I used a steel straight-edge and the heavy X-Acto to trim away the excess foam core.  I bought a self-healing cutting mat at the Currys Art Supply store and it's perfect for this kind of work.

The canvas looks awesome.  Colours are bright, gamut is excellent and the canvas texture is very appealing without degrading the image quality in any way.  The black and white print from the Sinar looks stunning on the canvas.  I spent a lot of time making the shot and while there is always room for improvement, I love that I can see ten zones in the image.  Canvas is the perfect media for this kind of work.

I have not yet tried the other Breathing Color papers, but my first experience with their Crystalline Satin has been awesome.  They make a really fine product and handle the software end better than most paper companies.  Now that I know the trick to ordering the paper in Canada (call Pat at Amplis direct), I'll buy more in the future.